4 Replacement Procedures
4.26 Wireless LAN antenna/Bluetooth antenna
Removing the Wireless LAN antenna/Bluetooth antenna
To remove the wireless LAN antenna/Bluetooth antenna, follow the steps below and refer to
Figure 4-48.
1. Peel the insulator and peel off the acetate tapes securing the wireless LAN antenna
cables and Bluetooth antenna cable.
2. Remove the wireless LAN antennas (two or three) and Bluetooth antenna from the
display rear cover.
Bluetooth antenna
Wireless LAN antenna
Acetate tape
Figure 4-48 Removing the wireless LAN antenna/Bluetooth antenna
4-76 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)
4.26 Wireless LAN antenna/Bluetooth antenna
Acetate tape
Acetate tape
Insulator