Figure 4.18 Disconnect The Ffc And Remove Two Screws; Rgb Board; Removing The Rgb Board - Toshiba Satellite Maintenance Manual

4.9

RGB Board

Removing the RGB Board

Remove the RGB Board according to the following procedures and Figures 4.18 and 4.19.
1. Disconnect the FFC from the motherboard and peel it off the logic lower assembly.
2. Remove one M2x3 and one M2x6 screws securing the RGB board.

Figure 4.18 Disconnect the FFC and remove two screws

Satellite/Satellite PRO T230D Maintenance Manual
4 Replacement Procedures
M2×6*1
M2×3*1
4-27