Fehler! Verwenden Sie die Registerkarte 'Start', um
soll. Fehler! Verwenden Sie die Registerkarte 'Start', um
werden soll.
4.9
RGB Board
Removing the RGB Board
Remove the RGB Board according to the following procedures and Figures 4.18 and 4.19.
1. Disconnect the FFC from the motherboard and peel it off the logic lower assembly.
2. Remove one M2x3 and one M2x6 screws securing the RGB board.
Figure 4.18 Disconnect the FFC and remove two screws
Satellite/Satellite PRO T230 Maintenance Manual
標題
2 dem Text zuzuweisen, der hier angezeigt werden
標題
2 dem Text zuzuweisen, der hier angezeigt
M2×3*1
4 Replacement Procedures
M2×6*1
4-31