Toshiba TECRA A9 Series Maintenance Manual page 170

3.20 ONLY ONE TEST
Subtest 5 LED
This subtest checks if each LED lights properly.
The following message appears in the display in order. Follow the instructions
in the display to execute the test.
[HDD Access LED test]
Press any key and following message appears in the display.
[Caps/Num/Overlay BT/W-LAN LED test]
(1)
(2)
(3)
(4)
Confirm corresponding LED lights properly.
Press Enter and following message appears in the display.
Check [DC-IN]&[Power]&[Main Battery]LED= Green
Check if the color of the message changes orange to green alternately.
Press Enter and return to the ONLY ONE TEST menu.
Subtest 6 Buuton
This subtest checks the moving of the of the front operation panel button.
Press the Toshiba Assist button after the following message appears.
Step 1
Press Function button (Assist button )
OK message appears in the display if the test ends without an error.
Press any key return to each Steps if NG! or Press any key message apprears.
TECRA A9(S5/P5/S200) Maintenance Manual (960-633)
Press [Caps Lock ] key ! ...Caps
Press [Fn + F10
Press [Fn + F11
Slide [BT/W-LAN switch L&R]!
X
*
3 Tests and Diagnostics
] key ! ...Arrow
] key ! ...Num
1 2
* *.
[CONFIDENTIAL]
(on/off)
(on/off)
(on/off)
(on/off)
3-45