Installing The Keyboard - Toshiba TECRA A9 Series Maintenance Manual

4 Replacement Procedures

Installing the Keyboard

To install the keyboard, follow the steps below and refer to Figure 4-9 to 4-11.
1. Place the keyboard face down on the palm rest.
2. Connect the keyboard cable to the connector CN3230 on the system board.
CAUTION: Extra portion of the keyboard cable must be put under the palm rest.
3. Install the keyboard support plate and secure it with the following screw.
•
M2.5×6B
4. Turn the keyboard face up and set it in place.
5. Secure the keyboard with the following screws.
•
M2.5×4B
6. Install the keyboard holder and press to secure the latches.
4-22 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)
FLAT HEAD screw
FLAT HEAD screw
×1
×2
4.7 Keyboard