Advanced Scanner Configuration - Pepperl+Fuchs VB14N Manual

VB14N

ADVANCED SCANNER CONFIGURATION

The following are alternative or advanced scanner configuration methods:
Host Mode Programming
The scanner can also be configured from a host computer using the Host Mode programming
procedure, by commands via the serial interface.
Advanced Genius™ Configuration
The ADVANCED selection available when starting the Genius™ program is addressed to expert users
being able to complete a detailed scanner configuration. By choosing this option it is possible either to
start a new scanner configuration or to open and modify an old one. The desired parameters can be
defined in the following window, similar to the MS Explorer:
Alternative Layouts

The ID-NET™ is a built-in high-speed interface dedicated for high-speed scanner interconnection.
ID-NET™ is in addition to the Main and Auxiliary serial interfaces.
If you need to install an ID-NET™ network refer to the VB14N Reference Manual.
The scanner can also be configured by reading programming barcodes. See the ID-NET™ Setup
Procedure Using Programming Barcodes.

If you need to install a Pass-Through network refer to the VB14N Reference Manual.

If you need to install a Multiplexer network refer to the VB14N Reference Manual.

If you need to install an RS232 Master/Slave (for backward compatibility) refer to the VB14N
Reference Manual.
14
Figure 10 - Genius™ Parameter Explorer Window