Step 3 - Mode Button Configuration - Pepperl+Fuchs VB14N Manual

VB14N
STEP 3 – MODE BUTTON CONFIGURATION
The Mode Button is the intuitive Human Machine Interface designed to improve ease of installation
and maintenance.
Status and diagnostic information are clearly presented by means of the five colored LEDs, whereas
the single push button gives immediate access to the following relevant functions:

AutoSetup to self-optimize and auto-configure reading
performance in demanding applications

AutoLearn to self-detect and auto-configure for
reading unknown barcodes (by type and length)

Test Mode with bar-graph visualization to check static
reading performance
The colors and meaning of the five LEDs are illustrated in the following table:
READY (green)
GOOD (green)
TRIGGER (yellow)
COM (yellow)
STATUS (red)
* When connected to a Fieldbus network through the CBX500, the COM LED is always active, even in the
absence of data transmission, because of polling activity on the Fieldbus network.
During the reader startup (reset or restart phase), all the LEDs blink for one second.
On the back of the reader near the cable, the "POWER ON" LED indicates the laser scanner is
correctly powered.
This LED indicates the device is ready to operate.
This LED confirms successful reading.
This LED indicates the status of the reading phase.
This LED indicates active communication on main serial port. *
This LED indicates a NO READ result.
5