To Change The Leg (Manual Leg Change); To Skip (Omit) A Destination - JRC JLR-7700MKII Instruction Manual

4.3.1.2

To Change the Leg (Manual Leg Change)

Let's assume a case that the current leg (#001 - #002) needs to be changed to the next leg (#002 - #003)
provided that the route plan has been set to #001 - #005 since your vessel has entered the preset arrival alarm
range. In this case, operate as follows.
Press the DEC and ENT keys.
The leg displayed on the NAVIGATE screen will change from #001 - #002 to #002 - #003. Note that the
function can be used also when the automatic route sequencing mode is selected.
Leg #001 - #002
#002
Currently
selected leg
Your vessel
#001
4.3.1.3

To Skip (Omit) a Destination

Let's assume a case when your vessel is navigating along the current leg between the destinations #001 and
#002 according to the preset route plan, which is set to the waypoints #001 - #005. This function can be used
in case it is necessary to skip the next destination and to navigate the vessel toward another destination #003,
for example.
The next destination can be skipped if a given route plan has been set and your vessel is not navigating along
the last leg. In this case, make the following operations.
Press the INC and ENT keys.
The leg displayed on the NAVIGATE screen will change from #001 - #002 to #001 - #003.
Leg #001 - #002
#002
#001 Your vessel
#005
#003
#004
#005
#003
#004
Leg #002 - #003
#002
Your vessel
#001
Leg #001 - #003
#002
Your vessel
#001
JLR-7700 MK 2 GPS Navigator
#003
Newly
selected leg
#004
Skip a destination
#005
#003
#004
#005
45