Data Output - JRC JLR-7700MKII Instruction Manual

JLR-7700 MK 2 GPS Navigator
3.4.4

Data Output

The "DATA OUT" connector provided on the rear panel of the navigator can output data for the plotter, auto-
matic pilot, printer, remote display unit, fishfinder, radar and so on.
The format of data to be output can be selected from the following four types. Two each peripheral units can
be connected to the DATA 1 or DAT 2 output.
If select "NMEA0183 output per second" at DATA1 (or DATA2), the output of
DATA2 (or DATA1) is fixed to "NMEA0183 output per second" automatically,
and other data format can not be selected.
See the item 4.3.3.3 "Selection of the Data Output Format" to switch the data format.
1
2
3
DATA OUT connector
32
Output format available
for data 1 and 2
NMEA0180
NMEA0183Ver1.5
NMEA0183Ver2.1
JRC format
NMEA0183Ver2.1/SEC
CAUTION
7
6
5
4
Number of external equipment
that can be connected
2 units each
2 units each
2 units each
2 units each
2 units each
Pin No.
1 Data 1 output (TTL level)
2 Data 1 common (GND) (TTL level)
3 Data 2 output (
4 Data 2 output (
5 NC
6 Relay output (Log pulse),
7 Relay output (Log pulse),
Remarks
) (RS-422 level)
) (RS-422 level)
output
output