Before Commencing The Equipment Operation - JRC JLR-7700MKII Instruction Manual

JLR-7700 MK 2 GPS Navigator

Before Commencing the Equipment Operation

Graphical Symbols
WARNING
CAUTION
Examples of the Symbols
Electric shock
Don't
Don't
disassemble
Instruction
Disconnect
the power
supply plug
2
Several graphical symbols are used in this manual to ensure safety and proper
operation of the equipment and to avoid possible human injury or property
damage. The symbols and their meanings are shown below. We would
recommend you to carefully read the manual to obtain a thorough
understanding on these symbols.
Instructions shown with this symbol represent those
that can cause death or severe injury, if not observed.
Instructions shown with this symbol represent those
that can cause injury or property damage, if not
observed.
The symbols shown in the
(including the potential dangers and warnings).
A tangible instruction is shown in the symbol. For example, the symbol shown
to the left indicates that one is likely to get an electric shock.
The circle symbols with a slash from the upper left to the right bottom
represent the specific actions prohibited to avoid potential hazards.
A tangible instruction is shown in the symbol. For example, the symbol shown
to the left indicates that the disassembly is prohibited.
The black circle symbols represent the obligatory actions or instructions to
avoid potential hazards.
A tangible instruction is shown in the symbol. For example, the symbol shown
to the left indicates that the power supply plug needs to be disconnected.
mark represent those that require attention