Installation Of The Dgps Receiver On The Mast - JRC JLR-7700MKII Instruction Manual

JLR-7700 MK 2 GPS Navigator
3.1.3

Installation of the DGPS Receiver on the Mast

The following figure shows how to install the receiver on the mast.
DGPS receiver
NNN-4331
1. Loosen the fitting belt screw
with a screwdriver to remove
the clamp.
Minus screwdriver
24
Screws, mounting
MTV302007
2. Coil the fitting belt around mast
as shown below.
Clamp
How to Install the Receiver on the Mast
Fitting belt
MPBP02520
Mast
( 26 90)
3. Tighten the clamp screw with
the screwdriver.