Route Sequence Screen; Setting The Route Plan; Canceling The Route Plan - JRC JLR-7700MKII Instruction Manual

JLR-7700 MK 2 GPS Navigator
4.5.3

ROUTE SEQUENCE Screen

How to use the route plan
A route plan consists of multiple legs obtained by connecting multiple waypoints.
Route plan
Port
(010)
For example, let's assume a case when navigating from a port
fishery (012), and then to another port
The route plan consists of a series of leg obtained by connecting the multiple waypoints starting from the
port (010) to the fisheries (011 and 012) and then to the port
The equipment has a function to automatically switch the current leg to the next leg after the vessel has
entered the preset arrival alarm range if the vessel is being navigated based on the preset route plan. See the
item 4.5.3.3 "Setting the Arrival Alarm Range" and 4.5.3.4 "Switching between the Automatic and Manual Leg
Change".
4.5.3.1

Setting the Route Plan

Press the key provided on the right hand side of the ROUTE SEQ to enter the starting waypoint
number 010 to set the route plan 010 to 013, for example.
Press the 0 , 1 , and 0 keys.
Next, enter the last waypoint number 013.
Press the 0 , 1 , 3 and ENT keys.
Memo
The route plan needs to be registered in the order of memory number under any circumstances;
however, the numbers for the starting and last waypoint do not need to be registered in the chronological
order. For example, the route plan can be set to navigate the vessel from the port
(013) and then back to the port
Enter XXX-XXX for the route plan if a given preset route plan needs to be canceled. The route plan can
also be erased by pressing the GOTO key on the NAVIGATE screen, COURSE DEVIATION IND.
screen, or PLOT screen to enter "XXX".
XXX denotes the state ready for input and can be selected by pressing the CLR key.
4.5.3.2

Canceling the Route Plan

Any one of the following four methods can cancel the preset route plan. Note that "XXX" needs to be entered
as the waypoint to cancel the route plan, which is common to all the four methods. XXX denotes the state ready
for input and can be selected by pressing the CLR key. (See the item 4.3.1.4 "Canceling the Route".) The
display of "_ _ _" (three hyphens) will appear in the column after the route plan has been canceled. Note that the
information related to the waypoint (bearing, distance, time, and deviations) is not displayed in other columns
since canceling the route plan means that no destination needs to be set.
(1) Enter "XXX - XXX" to the route plan on the ROUTE SEQUENCE screen.
(2) Press the GOTO key on the NAVIGATE screen to enter "XXX" as the waypoint.
(3) Press the GOTO key on the COURSE DEVIATION IND. screen to enter "XXX" as the waypoint.
(4) Press the GOTO key on the PLOT screen to enter "XXX" as the waypoint.
58
Waypoint
Fishery
(011)
Waypoint
Leg
Waypoint
Fishery
(012)
(010) to a fishery
(013).
(010) from the port
Port
(013)
(011), to another
(013).
(010) to the port
(013).