Daikin SkyAir RZQ200 · 250C7Y1B Service Manual page 31

Method of Operating Remote Controller
3.2.2 Service Mode Setting
Procedure
1. Enter the field set mode.
2. Enter the maintenance mode.
3. Select the mode No. (Mode 43, 44 or 45)
4. Select the unit No.
5. Carry out the necessary settings for each mode. (Mode 43 only possible for wireless remote
6. Return to the normal operation mode.
Table
Mode
No.
43
44
45
20
5
4
1, 2, 6
5 3
Continue to push the inspection / test operation button for a minimum of 4 seconds.
After having entered the field set mode, continue to push the inspection / test operation
button for a minimum of 4 seconds.
Set the desired mode No. with the up/down temperature setting button.
Select the indoor unit No. set with the TIME MODE START/STOP button.
controller)
• In case of Mode 43;
Press TIMER ON / OFF BUTTON to decide the forced Fan ON.
• In case of Mode 44;
Set
"Fan speed" with FAN SPEED CONTROL BUTTON and "Air flow direction" with AIR
FLOW DIRECTION ADJUSTING BUTTON, then press TIMER ON / OFF BUTTON to decide.
•
In case of Mode 45;
Select the changed unit No. with
BUTTON to decide.
Tap the inspection / test operation button one time.
Function Content and Operation Method Example of Remote Controller Display
Forced Fan Turns the fan ON for each unit
ON individually.
Individual Sets fan speed and air flow
Setting direction for each unit
individually when using group
control.
Settings are made using the
"air flow direction adjust" and
"fan speed adjust" buttons.
Unit No. Changes unit No.
Change
Set the unit No. after changing
with the programming time up-
down button.
5
5
or button, then press TIMER ON / OFF
SiBE26-701
Remote Controller