For Network Interface Cable Users (For Mac Os 8.6 To 9.2 Users); For Network Interface Cable Users - Brother MFC8420 Service Manual

3.2.7 For Network Interface Cable Users (For Mac
(1) Switch off and unplug the machine from the AC outlet and disconnect it from your
Macintosh if you already connected an interface cable.
(2) Turn on your Macintosh
(3) Insert the supplied CD-ROM for the operating system you are using into your CD-ROM
drive.
(4) Double-click the Start Here! icon to install the printer, scanner and PC-FAX Send drivers.
If the language screen appears, select your language.
(5) Click MFL-Pro Suite for your country to install.
(6) After the installation is completed, restart your Macintosh
(7) Connect the network interface cable to the printer, and then connect it to a free port on
your hub.
(8) Turn on the machine by plugging in the power cord. Turn the power switch on.
(9) Open the Chooser from the Apple menu.
(10) Click the Brother Laser (AT) icon, and then select BRN_xxxxxx_P1.
Close the Chooser.
NOTE:
xxxxxx are the last six digits of the Ethernet address.
OK:
The setup is now complete.
®
OS 8.6 to 9.2 Users)
®
.
2-25
MFC-8420/8820D/8820DN, DCP-8020/8025D/8025DN
®
.
SERVICE MANUAL