Display Of The Equipment's Log Information (Maintenance Mode 80); Display Of The Equipment's Log Information - Brother MFC8420 Service Manual

CHAPTER 7 MAINTENANCE MODE
3.15

Display of the Equipment's Log Information (Maintenance mode 80)

< Function >
The equipment may display its log information on the LCD.
< Operating Procedure >
(1) Press the 8 and 0 keys in this order in the initial stage of the maintenance mode.
The USB serial number appears on the LCD.
(2) Press the Start button. Each time the Start button is pressed, one of the following log
information items appears on the LCD in the order given below.
(3) To stop this operation and return to the equipment to the initial stage of the
maintenance mode, press the Stop button.
*
*
1) Jam count, indicating how many times a paper jam has been occurred
2) Page count, indicating how many pages the photosensitive drum has been printed
3) Total page count, indicating how many pages the equipment has been printed
since produced
4) Drum count, indicating how many times the photosensitive drum has been rotated
5) Drum change count, indicating how many times drum replacement has been
made
6) Toner change count, indicating how many times toner replacement has been
made
7) Copy page count, indicating how many copies have been made
8) PC print page count, indicating how many pages the equipment has been printed
as an output device of the connected PC
9) FAX page count, indicating how many received FAX pages have been printed
10) Error code of the most recent machine error *
11) Error code of the most recent communications error *
12) ADF jam count, indicating how many times a document jam has been occurred
13) ADF page count, indicating how many documents have been fed
When you press the Set button while the MACHINE ERR error code is displayed,
1
the last error code is displayed. Each time the Set button is pressed, up to the ten
error codes are displayed one by one in reverse order.
When you press the Set button while the COMEER1 error is displayed, the last
2
error, the previous error, and the second previous error are displayed in turn. The
indication changes from COMEER1, COMEER2, to COMEER3.
1
7-24
2