Novation ReMOTE SL COMPACT User Manual page 81

ENCODERS GROUP B and C – These act as standard analogue rotary controls.
ENCODERS GROUP D – These are not set to send MIDI messages and FL Studio will not assign parameters to them
when they are operated.
GROUP B1 BUTTONS 1-4 – These are momentary or 'hold' buttons. If a parameter is assigned to these then it will
be turned on when the button is pressed and off when the button is released.
GROUP B1 BUTTONS 5-8 – These are two pairs of increment/decrement buttons. When you assign either button
in a pair to a parameter, the decrement button will decrease the parameter value by 1 step when pressed and the
increment button will increase it by one step when pressed.
BUTTONS GROUP B2 and B3 – These are switch-type buttons. When you assign a button to a parameter it will
cause the parameter value to go to minimum and maximum on alternate presses.