Novation ReMOTE SL COMPACT User Manual page 44

The 8 assignable buttons can be used to control solos, mutes and record arming. The BUTTONS GROUP SELECT
SWITCHES determine what the buttons control. buttons Group B1 controls solos. buttons Group B2 controls record
arming. buttons Group B3 controls mutes.
The encoders and buttons only control the 8 mixer tracks active on the SL Compact. To bank to other tracks on the mixer,
use the PAGE UP/DOWN buttons. When the encoderS Group D switch is pressed, the SL Compact display shows
the function of each of the other group switches, which is useful if you forget how the mixer parameters are assigned to
the SL Compact.
To control sends, the SL Compact must be put into Flip mode. To do this, press and hold the SHIFT button (also labelled
DRUMPADS) then press F1/ENCODERS. In Flip mode, the same controls for the mixer work for the sends on each track,
as follows:
In Flip mode, the SPEED DIAL is used to cycle through send banks. To exit Flip mode, press and hold the SHIFT button then
press F1 once again.
It is possible to control plug-ins from the Pro Tools Automap Template by pressing the BUTTONS GROUP B4 SWITCH to
enter Insert mode. The SL Compact controls can then be used to control plug-ins as follows:
There are in fact two modes for controlling plug-ins – Insert Select mode and Insert Edit mode. You can switch between
these two modes using BUTTON 6. In Insert Select mode you can select different plug-ins and in Insert Edit mode you can
edit plug-in parameters. When you first press the BUTTONS GROUP B4 SWITCH the SL Compact will go into Insert Select
mode but after that it will remember which Insert mode you were previously in when switching between controlling the
mixer and inserts.