Novation ReMOTE SL COMPACT User Manual page 57

Bank – this setting allows you to send MIDI bank change messages from the SL Compact. Bank change messages are
sent as a CC0 (Bank MSB) and CC32 (Bank LSB) pair. The Bank MSB value is always set to 0 and the Bank LSB value is
as displayed. The MIDI channel and the MIDI ports on which the messages are sent are determined by the KeybChan and
KeybPort settings in the Template Menu (see page 57)
Program – this setting allows you to send MIDI program change messages from the SL Compact. The MIDI channel and
the MIDI ports on which the messages are sent are determined by the KeybChan and KeybPort settings in the Template
Menu (see page 57)
Transpose – shows the amount in semi tones by which the keyboard is transposed. This can be set to any value from
-64 to +63
TempoBPM – This setting controls the tempo of the SL Compact's internal timing reference. If you are sending MIDI clock
from the SL Compact to other MIDI software or hardware then this setting will only have an effect over the synced devices
if the SL Compact clock source status is INTERNAL and RECEIVING. See the 'BPM Status' section below for information
on how to check the clock source status. This setting has an additional function when using the SL Compact in Automap
mode. If the Automap Universal Server software and a ReWire host application are running on your computer then the
tempo in the ReWire host will follow the TempoBPM setting on the SL Compact. The BPMPort setting in the Global Menu
must be set to ON for this to work so that ReWire tempo messages are sent when the TempoBPM setting is changed
(See page ??)
ComnChan – this setting allows you to change the Common MIDI channel of the Template (this setting is also found in the
Template Menu). This is the MIDI channel that any individual control with MidiChan set to 'ComnChan' will transmit on, and
is therefore useful for changing the setting of multiple controls at the same time. See page 57 for further details
BPM Status – Press the button above or below 'BPM Status' on the SL Compact display to see the current clock status
of the SL Compact. The display will look as follows:
The following information is displayed:
Internal Tempo – This is the tempo of the SL Compacts internal timing reference
Current Tempo – This is the current MIDI clock tempo.
Source – This is the MIDI clock source. The available sources are INTERNAL, USB 1, USB 2 and MIDI IN.
Status – This shows whether the SL Compact is receiving MIDI clock or not. If it is then RECEIVING will be displayed.
If not then FLYWHEEL will be displayed and the SL Compact will remain at the current tempo until a valid MIDI clock
source is detected again.
<<BPM>> – Use the encoder and buttons in line with this to adjust the tempo as described for the TempoBPM
parameter on the previous page.
Press the MENU button to exit the Quick Menu and return to Play Mode.