Novation ReMOTE SL COMPACT User Manual page 77

Pro53
Location: Templates 6 and 7
Title: Pro 53
Before using the Pro-53 template, you must import a controllermap file into the plug-in. To do this, click on the 'NI' logo on
the Pro-53 window and select 'load controllermap' from the drop-down menu. Locate the file 'RemoteSL.txt' in the Pro-53
resources folder on the SL Compact DVD and click 'Open'. The SL Compact Pro-53 template will then map correctly to the
software, mainly following the general synth parameter layout. You can save the 'RemoteSL.txt' file to your computer with
the other mapping files that come with the FM7, stored in the following location:
PC – C:\Program Files\Native Instruments\Pro-53\ Presets\Controller Maps
Mac – HD/Applications/Pro-53/Presets/Controller Maps
Battery 2
Location: Template 8
Title: Battery
Drumpads 1-8 trigger cells 1-8 (MIDI notes C1-G1). ENCODERS GROUP C are assigned to CC0-CC7 and correspond to
controllers A-H in the modulation section.
B4
Location: Template 9
Title: B4
Encoders Group A control Lower Manual with 'fully out' on Buttons Group B1. Encoders Group C are for Upper Manual with
"fully out" on Buttons Group B3. Encoders Group B and Buttons Group B2 are for other controls.
Kontakt II
Location: Template 10
Title: Kontakt II
We have created a default Kontakt multi to work with the SL Compact Kontakt 2 template. To load this into Kontakt 2
select 'load...' from the 'Load/Save' drop-down menu and select the 'ReMOTE_SL.nkm' file found in the Kontakt 2 resources
folder on the SL Compact DVD. The multi contains 8 empty instruments assigned to MIDI channels 1-8 respectively. Once
it is loaded, you can use Encoders Group A to control tuning of the 8 instruments, Encoders Group B to control pan and
Encoders Group C for level.
ImpOSCar
Location: Templates 11 and 12
Title: ImpOSCar 1and 2
A group of two standard templates that mostly follow the standard synth parameter layout is used for impOSCar.
ENCODER 3 in GROUP A is used to control osc 1 wave in template 1 and osc 2 wave in template 2.
Oddity
Location: Templates 13 and 14
Title: Oddity 1 and 2
A group of two standard templates that mainly follow the standard synth parameter layout is used for Oddity. Additional
osc parameters are assigned to ENCODERS GROUP B and BUTTONS GROUP B2. HPF cutoff is assigned to ENCODER 6 in
GROUP B. VCA and VCF velocity amounts are assigned to ENCODERS 7 and 8 in GROUP C.