Novation ReMOTE SL COMPACT User Manual page 47

The MOTU DP Automap template (Template 34) must be selected on the SL Compact when using it in Digital Performer
Automap mode. Once you have followed the above set up instructions the SL Compact will automatically switch to the
MOTU DP Automap template and will do so each time you subsequently start Digital Performer. Whilst using the SL
Compact in Digital Performer Automap mode, you can switch to any other template on the unit (for example to control AU
plug-ins) and then switch back to the MOTU DP Automap template to control Digital Performer again.
It is important to ensure that 'ReMOTE SL Compact port 1' is selected as the input for all MIDI and Instrument tracks
in Digital Performer so that Automap data on ports 2 and 3 does not get routed to soft-synths and MIDI devices. To
allow specific input ports to be selected you need to turn on Multi Record by selecting it from the 'Studio' menu in Digital
Performer.
The Automap Universal Server software allows tempo control from the SL Compact over any ReWire host application,
including Digital Performer (see section 13.1). If you are using the Automap Universal template (template 38) to control
Automap-wrapped AU plug-ins in Digital Performer then it is also possible to use the transport controls on the SL Compact
to control the transport in Digital Performer via ReWire (see section 7.2). For this tempo and transport control to work
you must enable the Automap Server as a ReWire input in Digital Performer. To do this create a stereo aux track in your
session and set its input to 'Automap Universal Transport:Dummy channel L 1-Dummy channel R 2'.
In Digital Performer Automap mode, the SL Compact can be used to control the mixer as follows:
Switch to Automap Universal template
The encoders can control track levels, panning and send levels. The ENCODERS GROUP SELECT SWITCHES determine what
the encoders control. encoders Group A controls track panning. ENCODERS Group B controls send levels, along with the
SPEED DIAL, which is used to select the send bank. ENCODERS Group C controls track levels.
The buttons can be used to control solos, mutes and record arming. The BUTTONS GROUP SELECT SWITCHES determine
what the buttons control. buttons Group B1 controls solos. buttons Group B2 controls record arming. buttons Group B3
controls mutes.
The encoders and buttons only control the 8 mixer tracks active on the SL Compact. To bank to other tracks on the mixer,
use the PAGE UP/DOWN buttons. When the encoder buttons Group D Switch is pressed, the SL Compact display shows
the function of each of the other group switches, which is useful if you forget how the mixer parameters are assigned
to the SL Compact.