Novation ReMOTE SL COMPACT User Manual page 68

LowVal (Low Value) and HighVal (High Value): These define the Low and High control value and should be set in
conjunction with the BtnType parameter (see below). The available options for this setting are standard MIDI system real
time messages: start (RT-Start), continue (RT-Contu), stop (RT-Stop), active sensing (RT-Actvs) and system reset (RT-Reset).
BtnType: This is exactly as described for Control Change (CC), however the STEP option and VELOCITY option for
drumpads are not available. If this is set to NORMAL, the button will send the Low Value message when pressed and
nothing when released. If this is set to TOGGLE, alternate presses of the button will send the Low Value and High Value
messages. This means that if Low Value is set to RT-Start and High Value to RT-Stop you can use a single button to start
and stop the receiving device.
PITCHBND (PITCH BeND)
This option only applies to the pitch wheel. No other controls on the SL Compact can be assigned to send pitch bend
messages. There are no options for limiting the control value as this can be done on the instrument you are controlling by
altering the pitch bend up/down range (if the option is available). The Ports, MidiChan and Name settings are the same
as for Control Change (CC) so see that section for information on these settings.