Open Date EUROCODE 150 Operator Instructions Manual page 17

DIGI-50 CONNECTION DETAILS - ROW C
Trigger/Print Signal - Grey twin core screened.
See page 14 for details of Print Trigger Selection
P+ Red
P- Black
Solenoid Valve - Black twin core.
S+ Red
S- Blue
Printer - Multi-core screened to 9 pin D connector.
D2 Mauve
D1 Brown
F2 Pink
F1 Black
PM White
T Green
T Yellow
H Red
H Blue
Note. Units supplied before October 2005 had only 14v DC supply for the foil sensor. If in doubt
contact your supplier.
Mains Cable - Three core white.
N Blue
L Brown
E Yellow/Green
Eurocode-Digi50 06/08/13
External trigger input. + volts connection.
External trigger input. - volts connection.
Solenoid valve output. + volts connection.
Solenoid valve output. - volts connection.
Type holder door safety switch return.
Feed to safety switch and foil sensor, 0v DC.
Feed to foil sensor, +27v DC (see note below).
Output from foil sensor.
Used for Printmaster foil sensor only.
Thermistor connection.
Thermistor connection.
Heater element.
Neutral ac heater element.
Neutral
Live
Earth
Pin 6
Pin 5
Pin 9
Pin 8
Pin 7
Pin 2
Pin 1
Pin 3
Pin 4
Page 17