Selection and Adjustment
of the Stitches according
to the "Synchrocolor" System
The selection chart (1), the stitch selector (2) and the
6 double superautomatic stitches shown on a red
adjusting dials (3-4) are provided with green and red
background
guide marks. By turning the dials to the
a elastic triple seam
corresponding colours, the most common basic
adjustments are synchronized.
*
net-stitch
1 Stitch Selection Chart
*
overlook stitch
The Eina-tx has 12 built-in stitches, i.e. 6 single
9 triple zigzag
automatic stitches shown on a green background.
*
decorative edging stitch
*
straight stitch
9 tricot stitch
*
stretch seam
Thus, these stitches are set, on principle, by turning
the stitch width and length dials (3 and 4) to the red
*
interlock stitch
guide marks.
" zigzag stitch
" elastic blind and edging stitch
" overcasting stitch or three-step zigzag
Thus, these stitches are set, on principle, by
turning the stitch width and length dials (3
and
4)
to the green guide marks.2
21
Need help?
Do you have a question about the TX and is the answer not in the manual?