Download  Print this page

Zip Fastener - ELNA TX Instruction Manual

Hide thumbs


Table of Contents
Zip Fastener
With the clip-on zipper foot
This foot can be positioned to the left (fig. 1) or to
the right (fig. 3) of the needle by fitting the foot
support into the left or right recess of the sole.
This makes it possible to sew without turning the
work around, by sewing the zip fastener once on
2 When the middle of the seam is reached, lower
one side of the foot and once on the other side.
the needle into the material and close the fastener
" Stitch width dial on
by pulling the slide. Lower the foot and continue
sewing up to the point.
Stitch length dial at between 1-3.
3 When one side has been sewn, pull the work (and
Baste on the fastener by folding the opening as per
the fastener) back towards you, move the ole to
the diagram. Leave the fastener open and sew from
the other side of the needle and sew the other
the opening to the point.
side from the opening to the point of the fastener.


Table of Contents

This manual is also suitable for:

Tx electronic 57

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jeme Prinss Nov 06, 2018 01:41:
    هل يشتغل مكينه بدون دعاسه الرجل