Download  Print this page

Advertisement

Table of Contents
Eyelet
Plates
2 and 4 mm
(1/i6"
and
'/")
and Awl
-
{b~
fig. 213
Make it possible to embroider eyelets with a diameter
of 2 and 4 mm (
1
/ie" and Ib"). The awl is used for
piercing the material to make the holes.
2 or 2,7 mm Twin Needle - fig. 216
For sewing piping, decorative designs, etc.
Blind Stitch Foot with Guide - fig. 203
Embroidery Foot - fig. 223
Metal foot for sewing various satin stitches,
decorative stitches, etc.
Darning Plate with Round Hole - fig. 224
For particularly fine darning.
Fork for Rug-making and Fringes - fig. 229
Used for making rugs, the undersides of cushions or
fringes on certain woollen garments.
ix
Not illustrated:
Teflon-coated Embroidery Foot - 223 T
For easy embroidering on plastic and leathers.
Needle Plate with a Round Hole - 225
For straight sewing on special fabrics.
Nickel-plated Sewing Foot - 228
This particularly strong foot is very suitable for
44
sewing on a large scale (straight stitch, zigzag,
overcasting, etc.).

Advertisement

Table of Contents

This manual is also suitable for:

Tx electronic 57

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jeme Prinss Nov 06, 2018 01:41:
    هل يشتغل مكينه بدون دعاسه الرجل