Power Computing Minitower 132 User Manual page 22

Removing 5.25-inch Drives
1. Remove the chassis cover (
2. Disconnect all cables that are attached to the device being removed. (
Removal on page 22).
Figure 12: CDROM Removal
Sound Connector
SCSI Connector
3. Remove the four screws securing the drive to the drive cage
4. Slide the drive forward out of the chassis.
Installing 5.25-inch Drives
1. Slide the drive half way into the front bay location, making sure the cable connections are facing the
rear of the computer. Pushing the drive in only halfway makes cable connection easier by giving more
maneauvering room behind the drive.
2. Connect the cables to the drive. Slide the drive in the rest of the way, making sure that the drive
is flush with the front of the computer.
22
5.25-inch Drive Removal/Installation
5.25-inch Drive Removal/Installation
refer to Chassis Cover Removal/Installation on page 6).
see Figure 12: CDROM
Power Connector
CONFIDENTIAL