Removing The Pci Riser Card - Power Computing Minitower 132 User Manual

Removing the PCI Riser Card

1. Remove the chassis cover (
2. Locate the riser card (
3. Remove any installed PCI cards (
4. Remove the two screws that secure the riser card to the crossbar.
5. Disconnect the power cable to the CPU cooling fan.
Figure 11:
PCI Riser Card
removal
6. Remove the hex-head screw that secures the support beam to the rear of the chassis. Swing the
rear end of the crossbar up, then unhook it from the front of the chassis and remove it from the
computer.
7. Firmly grasp the PCI riser card and pull it straight out of the computer. Sometimes a gentle
rocking motion from end to end
19
PCI Riser Card Removal/Installation
PCI Riser Card Removal/Installation
refer to Chassis Cover Removal/Installation on page 6).
refer to MLB Diagram on page 5).
refer to PCI Cards Removal/Installation on page 16).
(not side to side)
will make it easier to remove the PCI card.
CONFIDENTIAL