Eu Conformity Declaration - Makita DCS6400 Instruction Manual

EU Conformity Declaration

The undersigned, Tomoyasu Kato, as authorized by MAKITA Corporation, declare that the MAKITA machines,
Typ: 038, 039, 040
Chain saw
DCS6400, 6401, 6400H, 6401H (040)
DCS7300, 7301, 7300H, 7301H (039)
DCS7900, 7901, 7900H, 7901H (038)
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho, Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and health
requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG.
EU EMC Directive 2004/108/EG.
Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 11681-1, CISPR 12,
EN 50082-1.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured sound power level (L
The guaranteed sound power level (L
The EU-Type-Examination CertiÞ cate was performed by: TÜV Product Service GmbH, ZertiÞ zierungsstelle, Ridlerstraße 31, D-80339
München.
The technical documentation is on Þ le at MAKITA International Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks, MK15
8JD, England.
Anjo, 4.11.2009
For MAKITA Corporation
Tomoyasu Kato
Managing Director
EU prototype test certiÞ cate No.
M6T 09 10 24243 109
M6T 09 10 24243 109
M6T 09 10 24243 109
) is 116 dB(A).
d
) is 115 dB(A).
wa
31