Eu Conformity Declaration - Makita DCS9010 Instruction Manual

EU Conformity Declaration

The undersigned, Tomoyasu Kato, as authorized by MAKITA Corporation, declare that the MAKITA machines,
Type: 024
Chain saw EU prototype test certiÞ cate No.
DCS9010 M6T 09 10 24243 104
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho, Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and health
requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG, EU EMC Directive 2004/108/ EG, Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 11681-1, EN ISO 14982.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured noise level (L
guaranteed noise level (L
d
The EU-Type-Examination Certificate was performed by: TÜV Product Service GmbH, Zertifizierstelle, Ridlerstr. 31,
D-80339 München.
The technical documentation is on Þ le at MAKITA International Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks, MK15
8JD, England.
Anjo, 4.11.2009 for MAKITA Corporation
Tomoyasu Kato
Managing Director
Notes
26
) is 118 dB(A).
) is 116 dB(A). The
wa