System Login - E-Lins H900 Series User Manual

Note:
As shown in Fig. 3.2-3, "Default gateway" depends on whether the configuration
computer connects with Internet through original local network configuration.
Internet is accessed through original local network, the default gateway setting does
not need to be modified; if E-Lins H900 3G Router + is used, you need to modify the
default gateway and configure it as E-Lins H900 3G Router's default LAN IP address
192.168.8.1.
2. Network check
Step 1: IP configuration check
Use the command of ipconfig to check whether the IP address is correctly set or added.
You can enter DOS mode and key-in command: ipconfig, for instance:
C:\>ipconfig
Windows IP Configuration
Ethernet adapter local connection:
Connection-specific DNS Suffix. :
Auto configuration IP Address . . .: 192.168.8.7
Subnet Mask . . . . . . . . . . .: 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.8.1
Step 2: connectivity check
After the configuration is completed, you can check the connectivity between it and
E-Lins H900 Cellular Router by ping command. Key-in ping command in system
command line:
Ping 192.168.8.1
If the following information appears:
Pinging 192.168.8.1 with 32 bytes of data:
Reply from 192.168.8.1: bytes=32 time=2ms TTL=64
Reply from 192.168.8.1: bytes=32 time=2ms TTL=64
By now, it means that the configuration computer has been connected to the router.
You can carry out configuration operation on it.

3.2.4 System login

Open the IE browser, and input http://192.168.8.1/ in address bar, as shown below:
H900 Series Cellular Router User Manual
If