E-Lins H900 Series User Manual page 48

Route Mode configuration parameters include:
【Interface】:On selected interface, the source IP of packets pass through H900would
not be replaced to H900's IP, the destination machine can see the source IP directly.
Not e:
Nor mally you may not need this option except for some certain application.
2. DMZ setting
Select the "DMZ" option to go to the following configuration interface:
DMZ configuration parameters include:
【Outside Interface】: Set the interface on which the DMZ function acts.
【Inside Address】: Set the IP address of the host assigned by DMZ record.
3. NAT setting
Fig. 3.3.7.1-3: NAT&DMZ Setting Interface
Fig. 3.3.7.1-4: DMZ Setting Interface
H900 Series Cellular Router User Manual