Network Configuration - E-Lins H900 Series User Manual

H900 Series Cellular Router User Manual

3.2.3 Network configuration

After the configuration environment is connected well as one of the connection
methods, the local configuration computer IP address and other parameters should be
set. Take the LAN connection method as an example to describe the network
configuration procedure shown as below.
1. Configuration computer setting
First, enter the computer control panel of the selected computer, find "Network
Connections" icon and double click it to enter, select "Local Area Connection"
corresponding to the network card on this page. Refer to the figure below.
Fig. 3.2.3-1: Computer Local Connection Configuration
Enter (double click or right click) the "Local Area Connection" "Property (R)" and enter
the interface shown in the figure below: