E-Lins H900 Series User Manual page 20

H900 Series Cellular Router User Manual
Fig. 3.2.3-3: TCP/IP Properties Configuration
Method 1: general configuration
This method will temporarily interrupts the communication between the computer
under configuration and LAN, and the specific parameter configuration is shown as
below:
IP address: 192.168.8.* (*indicates any integral between 2 to 254)
Subnet mask: 255.255.255.0
Default gateway: 192.168.8.1
Remember:
E-Lins H900 Cellular Router LAN port factory default parameter:
IP address: 192.168.8.1;
Subnet mask: 255.255.255.0
E-Lins H900 Cellular Router factory default login parameter:
Management interface login IP address: 192.168.8.1
Login name: admin
Login password: admin
Method 2: advanced configuration
If you don't want to interrupt local PC LAN communication and configure E-Lins H900
Cellular Router when the former network configuration exists, it is required add route