Other Accessories - E-Lins H900 Series User Manual

LAN1～5—LINK:
LAN1～5—ACT:
NET:
RF:
Back panel interface
E-Lins H900 Cellular Router's all interfaces are designed on the back panel as shown
below:
GPS
GPS antenna available on GPS edition only
The interfaces on the back panel are described as below:
ANT: Antenna (SMA negative terminal) interface, which is able to match with standard
short antenna, vehicular antenna or directional antenna;
DEF: Reset button used for restoring the default parameters.
DC: DC power supply interface. (Be sure to check if the voltage of power supply is
consistent with the label on the router)
LAN: 10/100BaseT self-adapting Ethernet interface;
COM: DTU function, this port receives data from a RS232 port, and sends all the data it
received to an IP address or a domain on the Internet. All these are automatically and
based on mobile network and data will be sends transparently without any change.

2.1.2 Other Accessories

For safe transportation purpose, E-Lins H900 series Router should be packaged properly.
Pease keep the packaging materials well after the package is opened for future use in
LAN1～LAN5 status, blink when data communication
LAN1 ～ LAN5 connect status: light, solid: connection
normal. Otherwise dark
Dark (no connection, no dial-up); blink fast(during
dial-up), blink slowly(connect 2.5G network); light,
solid:(connect 3G network)
Module power indicator, light, solid: normal
LAN
Fig. 2.1.1-2: Back Panel
H900 Series Cellular Router User Manual
COM DEF DC ANT