Vpn; L2Tp Configuration - E-Lins H900 Series User Manual

【ID】 : Set the identification of the firewall rule, generally using a name with meanings.
【Protocol】: Select the protocol of the firewall rule.
【Source IP/Mask】: Set the source IP address of the firewall rule, may be one IP
address or one network segment, e.g.: 192.168.0.0/24.
【Source Port】: Set the source port number of the firewall rule. More than one port
number may be set, e.g. 13, 15, 100-150.
【Destination IP】: Set the destination IP address of the firewall rule. It must be one
unique IP address.
【Destination Port】 : Set the destination port number of the firewall rule. More than one
port number may be set, e.g. 50, 75-90.
【Action】: Select the actions to this rule of the firewall: Accept, Drop, Reject.
【Status】: Set whether enable this filter rule: Enable/Disable.
Select the "MAC Filter" to go to the following configuration interface:
【MAC Address】: Set the MAC address.
【Action】: Select the actions to this rule of the firewall: Accept, Drop, Reject.
【Status】: Set whether enable this filter rule: Enable/Disable.

3.3.6 VPN

If you click the VPN tab, the following sub-tabs appear on the page:
L2TP
PPTP
GRE
IPsec
3.3.6.1

L2TP configuration

Fig. 3.3.5-4: Firewall Setting Interface
Fig. 3.3.6: VPN Setting Interface
H900 Series Cellular Router User Manual