Security - E-Lins H900 Series User Manual

H900 Series Cellular Router User Manual
【Terminal information】: set the terminal's name.
【Rs232 setting】: please set the parameter as showed in picture and do not change
them.
About E-Lins GPS DEMO:
There is a demo software in the disk with products, if there is not, please ask for that
from our technical support.
About the demo, please install the software in disk. First install NetFramework 3.5, you
could download it at
http://www.microsoft.com/downloads/details.aspx?FamilyID=d0e5dea7-ac26-4ad7-b6
8c-fe5076bba986&DisplayLang=zh-cn
Then install GoogleEarthPluginSetup, and run the E-Lins GPS Express DEMO.
Then in the setting page, these two parameters are corresponding to data center's IP
and port, in the router's web UI page. The other parameter has no need to config.
If your PC connect H900 directly, you could input your local IP in the E-Lins GPS Express
DEMO, like 192.168.8.2.

3.3.5 Security

When you click the "Security" tab, the following sub-tabs appear on the page:
Fig. 3.3.5-1: Security Setting Interface