Login Eb - E-Lins H685m Series User Manual

3.5 3.5 3.5 L L L L ogin 3.5 ogin ogin ogin W W W W eb eb eb eb
3G Cellular Routers contains WEB SERVER, CONSOLE, TELNET and other configuration mode. It is suitable
for different users for configuration operation in local or remote. And the web server is easiest to be used, so
we advice your to used this configuration mode.
3.6 3.6 C C C C onnection onnection
3.6 3.6 onnection onnection configuration
S S S S tep tep tep tep 1 1 1 1 : : : : Ensure that the computer is on the same network address range as the Router and make it as
your computer's default gateway and DNS server.
Consult your operating software user manual to determine how to change the IP address on the Ethernet port of the
computer and the default gateway address. In the example below the IP address of the PC has been set to 192.168.0.2
－192.168.0.253 and
the default gateway is the default address of the cellular Router (192.168.0.254) and Primary DNS
as 192.168.0.254
For Windows XP the sequence is:
START >>Control Panel >> Network Connections >>Right-Click on Local Area Connection >> Properties
>> Internet Protocol
Change the computer's IP address, default gateway and DNS server and then click OK.
It may take a minute or two for the computer to be allocated the new IP address. In some cases, a reboot may be
required
S S S S tep tep tep 2: 2: 2: 2: To test that there is connectivity between the computer and the Axon, you can ping the Axon tep
using the ping command at the command prompt. To get to the command prompt in Windows XP, use:
START>>RUN>>cmd
The ping command is entered as follows:
If successful you should see some ping statistics like the following example:
Tel: +86 (755) 33231620 E-mail:
configuration
configuration configuration
E-Lins Technology Co.,Limited
sales@szelins.com sales@e-lins.com
E-Lins H685m Series Router User Manual
www.szelins.com