E-Lins H900 Series User Manual page 35

H900 Series Cellular Router User Manual
Fig. 3.3.4.3: Trigger On-line Data Configuration Interface
Trigger On-line Data parameters include:
【Status】: Set whether enable the Trigger On-line Data.
【Time limit for idle offline】: Decide the time limit of offline when the router has no
data transaction for a period. The value's unit is 'second', 0 means the router will always
on line.
【Dial-up overtime】: Set the give up time limit when the router cannot connect to the
internet. 0 means router will dial forever.
3.3.4.4 ICMP Check configuration
In the "Applications" main tab, click the "ICMP Check" sub-tab to set the ICMP Check
parameters and go to the following configuration interface:
Fig. 3.3.4.4: ICMP Check Interface
Trigger On-line Data parameters include:
【ICMP Check Service】: Set whether enable the ICMP Check Service.
【ICMP Check Address】: Set the address used to send ICMP pack to.