Priority Watch; Selecting The Call Tone (Wake Up Tone) - Uniden UH8080NB Owner's Manual

Operation

Priority Watch

To switch Priority Watch On/Off;
1. Press [MENU] two times.
The Priority Watch setting flashes.
2. Press /
between ON or OFF.
3. Press and hold [MENU] to save & exit
from the menu mode.
If SCAN is deactivated while it is tuned to an active channel, the
UH8080NB will stay on that active channel. If none of the channels are
active, the UH8080NB will reinstate the scan start channel.
NOTE
If OS/GS Scanning is initiated when there are no channels programmed
in OS/GS memory, an error tone will be heard and scanning will not start
(see Add/Remove Channels from SCAN Memory, p.19).
NOTE

Selecting the Call Tone (Wake Up Tone)

1. Press [MENU] four times.
The call tone setting flashes.
2. Press /
setting between 1, 2, 3... 10.
3. Press and hold [MENU] to save
& exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE
UNIDEN UH8080NB
to change the setting
to change the
22
UHF CB Transceiver