Hardware Installation Manual
6.
To change the IP address, at the CLI prompt, enter the following command and then
press Enter:
SAC>i<space>55<space>10.1.10.15<space>255.255.0.0<space>
0.0.0.0
SAC>i 55 10.1.10.15 255.255.0.0 0.0.0.0
7.
At the CLI prompt, type i to view the new IP address:
SAC>i
Net: 55, Ip=10.1.10.15
Net: 55, Ip=fe80::8154:57cb:6b0e:e115
A.3.2
Cabling OSN
Before you can connect remotely to the OSN Server, you need to cable a PC (running
Remote Desktop Connection) to the OSN Server's IP network interface.
The OSN3 server connects initially to the IP network through the LAN port of the OSN3
module.
To cable OSN3 for Remote Desktop Connection:
Connect the Ethernet LAN port of the OSN3 module to the LAN network, by
performing one of the following:
•
Remote PC connection: using a straight-through cable, connect the LAN port to
a switch that is connected to the IP network.
•
Local PC connection: using a crossover cable, connect the LAN port directly to
the PC's LAN port.
Figure A-6: Cabling OSN3 Module for Remote Desktop Connection from PC with Windows XP
Version 6.4
A. Open Solution Network Server Platform
Subnet=255.255.0.0
57
Gateway=0.0.0.0
February 2012