Hardware Installation Manual
A
Open Solution Network (OSN) Server
Platform
This section is intended for customers who wish to install the optional Open Solution
Network (OSN) server platform functionality. The device's chassis houses a plug-in OSN
Server module for hosting third-party, VoIP applications such as IP-PBX, Pre-Paid, and IP-
PBX redundancy. The OSN server is a standalone entity, integrated within the device, using
a separate Ethernet interface and IP configuration from that used by the device. The OSN
platform includes a powerful processor and hard disks allowing you to host third-party
applications such as IP-PBX, Pre-Paid, and IP-PBX redundancy.
The OSN server is available in one of the following models:
OSN Server Ver. 1 (OSN1): based on Intel Celeron (16 MHz) and uses the
Connection Module (CM) for the interface to the IP network
OSN Server Ver. 2 (OSN2): based on Intel Pentium (1.4 GHz) and uses the iPMX for
the interface to the IP network
A.1
OSN Server Modules Description
This section describes the OSN server modules.
Note:
A.1.1
Connection Module (CM)
The Connection module (CM) is installed in the chassis front panel.
Note:
Version 6.4
The Connection Module (CM), which provides connectivity to the IP network
is only implemented for OSN1.
Figure A-1: Connection Module
The CM module is applicable only to OSN1.
A. Open Solution Network (OSN) Server Platform
45
July 2011