Hardware Installation Manual
A.2.2
Installing the Linux Software
Once you have cable the OSN platform as described in the previous section, you can install
the Linux OS.
To install Linux on the OSN server:
1.
Start a terminal application (e.g. HyperTerminal) on your PC, and create a new
connection with the following settings:
•
Connect Port: COM1
•
Baudrate: 115200 (bits per second)
•
Data Bits: 8
•
Parity: None
•
Stop Bits: 1
•
Flow Control: None
2.
Power up the device.
3.
Insert the Linux installation CD into the USB CD-ROM drive; the terminal application
prompt appears.
4.
At the prompt, type the following:
linux text console=ttyS0,115200#
Note:
5.
Press the Enter key; the Linux installation begins.
6.
Continue installation according to the Linux installation instructions.
Version 6.4
Only one character is displayed each time you press a key.
A. Open Solution Network Server Platform
55
February 2012