AudioCodes Mediant 1000B Hardware Installation Manual page 17

Hardware Installation Manual
Item #
3
4
5 Power 1
6 Power 2
7 Schematic
Version 6.4
Label/
Module
CRMX CRMX module – see Section
LAN Extension (SWX) module – see Section
SWX
Note: The presence of this module depends on the ordered
configuration. If in the future you need to add such interfaces to
your device, you can order this module separately
(Optional) Spare Power Supply module slot. The device can
provide two extractable power supply units (Power 1 and Power
2). Each power supply unit provides an AC power connector on
its rear panel. If both Power 1 and Power 2 units are used, the
load is shared between them. This (optional) load-sharing feature
enables power failure protection (redundancy). When using this
feature, you are advised to connect each power supply unit to a
different AC supply circuit.
Main Power Supply module (see description above).
Extractable Fan Tray module with a schematic displayed on its
front panel showing the chassis' slot numbers. The Fan Tray
module cools the device's components. For more information,
see Section
Component Description
3.1.6
6.2 on page 47.
17
3. Physical Description
on page 22 for a description.
3.1.7 on page 24.
February 2012