Chapter 3 Mechanical System; External Covers - Canon FY8-13FW-000DADF-A1 Service Manual

III.BASIC CONSTRUCTION
A. External Covers
[2]
[1]
[1] Upper cover
[2] Original tray
[3] Body cover
[4] Front cover
Figure 3-101
Remove the covers as shown when
cleaning, inspecting, and repairing the inside of
the machine.
1. Removing the DADF
1) Turn on off the copier.
2) Disconnect the communication cable of
the DADF from the copier.
3) Open the DADF fully.
Figure 3-102
COPYRIGHT © 1998 CANON INC.
[3]
[4]
CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 3 MECHANICAL SYSTEM

4) Go to the rear of the copier, and lift the
DADF upright to remove.
Figure 3-103
Reference:
The feet of the hinges of the machine are
equipped with a locking mechanism
designed to prevent slippage. When
detaching the machine from the copier,
you must fully open it to disengage its
locks.
3-1