Canon FY8-13FW-000DADF-A1 Service Manual page 52

CHAPTER 2 BASIC OPERATION
3. Top Pick-Up Mode Delivery
a. Operation
The machine delivers the original on the
copyboard tray as follows:
If a stamp command (in fax mode) arrives
from the copier, the machine puts a stamp
marking in the middle of delivery.
1) Feeding the 1st Original
The feeding belt is rotated
counterclockwise to feed the 1st original
about 30 mm (to maintain the sheet-to-
sheet distance from the 2nd original).
2) Delivering the 1st Original/Picking Up the
2nd Original
The clutch (CL) is turned on to eliminate
the difference in speed between the
delivery/reversing roller and the feeding
belt; the 1st original is moved for delivery,
and the 2nd original is picked up.
3) Delivery to the Original Delivery Tray
While the trailing edge of the original is
moved to the original delivery tray, the
delivery motor (M5) switches to low speed
to deliver the original slowly.
2-38
COPYRIGHT © 1998 CANON INC.
2nd original
Original delivery tray
Figure 2-261
CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
1st original
Figure 2-259
1st original
Figure 2-260