I. BASIC CONSTRUCTION
A. Outline of the Electrical Circuitry
The machine's electrical mechanisms are controlled by the DADF controller PCB. A
microprocessor (CPU) is used on the DADF controller PCB, and the microprocessor reads the input
signals from the sensors and the copier and generates signals used to drive DC loads (motors,
solenoids) at such times as programmed in advance.
Sensor
Variable
resistor
COPYRIGHT © 1998 CANON INC.
DADF controller PCB
CPU
(Q1)
ROM
(Q2)
RAM
(Q4)
Communication
IC(Q3)
24V
5V
5 VDC
power
supply
Power supply
circuit
Copierk
Figure 2-101
CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
Motor
Solenoid
Clutch
Brake
Indicator
LED PCB
Motor
2-1