Canon FY8-13FW-000DADF-A1 Service Manual page 34

CHAPTER 2 BASIC OPERATION
3) Feeding
The feeding belt, registration roller, and
feeding roller are rotated to move the
original to the copyboard glass.
4) Picking Up the 2nd Original
When the original reaches a specific point
on the copyboard glass, the copier's
scanner starts to move forward. At the
same time, the second original is picked up
(if of small size).
A5,B5,B5R,A4,A4R
Small size
STMT,LTR,LTRR
B4,A3,LGL
Large size
279mm×432mm(11"×17")
Table 2-205
Caution:
In case of small-size originals, the second
and subsequent originals are "edged out"
by the registration roller so as to reduce
feeding time.
2-20
COPYRIGHT © 1998 CANON INC.
Registration roller
Edged out by
the registration roller
CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Feeding roller
Feeding belt
Figure 2-219
Scanner
Figure 2-220