4) Remove the screw [5], and detach the
solenoid unit [6].
[6]
Figure 3-344
5) Remove the reversing sensor jack [7], and
the grounding cord [8].
[7]
[8]
Figure 3-345
COPYRIGHT © 1998 CANON INC.
[5]
CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
6) Remove the screw [9], screw [11], and
fixing pin [12]; then, detach the reversing
guide [13].
Caution:
When mounting the fixing pin, be sure
that its position is as it was initially.
[13] [12] [11]
[10]
Figure 3-346
[9]
3-23