Setting Character Height And Character Orientation; Overview - Hitachi PB Series User Manual

3.3
"Product speed
matching"
Section 4.2,
"Setting the User
Environment"
For rotary encoder
wiring and setup see
See Instruction
Manual Section
1.5.3-5
Section 3
Setting Character Height and
Character Orientation
3.3.1

Overview

The procedure for setting the character height, character width, character orientation
and write position is described below.
3.3.1-1 Character height
The character height can be specified.
The character height can be set in the range from 0 to 99.
3.3.1-2 Character width
The character width can be specified.
The character width can be set in the range from 0 to 199.
When the product speed matching feature is implemented (rotary encoder is
connected), set the character width as indicated below:
Particle use percentage setting Character width setting
02
03 to 16

3.3 Setting Character Height and Character Orientation

001
000
3–17