Verifying And Backing Up Parameter Settings; Verifying And Backing Up Parameter Settings; Parameter Access Level: A1-01; Password Settings: A1-04, A1-05 - Omron JZA User Manual

4.8 Verifying and Backing Up Parameter Settings

4.8

Verifying and Backing Up Parameter Settings

Check changes to parameter settings using the Verify function.
page 59.
Save the verified parameter settings. Change the access level or set a password to the drive to prevent accidental
modification of parameter settings.
u

Parameter Access Level: A1-01

Setting the Access Level for "Operation only" (A1-01 = 0) allows the user to access parameters A1- and U-
only. Other parameters are not displayed.
Parameter
No.
Name
Selects which parameters are accessible via the digital operator.
Access Level 0: Operation only ( A1-01 and A1-04 can be set and monitored. U parameters can be
A1-01
Selection monitored)
2: Advanced Access Level (All parameters can be set and monitored)
u

Password Settings: A1-04, A1-05

The user can set a password to the drive to restrict access. The password is selected via parameter A1-05. The selected
password must be entered in parameter A1-04 to unlock parameter access (i.e., parameter setting A1-04 must match the
value programmed into A1-05). The following parameters cannot be viewed or edited until the value programmed into
A1-04 correctly matches the value as programmed in parameter A1-05: A1-01 and A1-03.
Note: Parameter A1-05 is hidden from view. To display A1-05, access parameter A1-04 and simultaneously depress the
key.
u

Copy Function (Optional)

Parameter settings can be copied to another drive to simplify parameter restoration or multiple drive setup. The drive
supports the following options:
n USB/Copy Unit
The copy unit is an external option connected to the drive to copy parameter settings to another drive. It includes a USB
adapter to connect the drive to a PC.
n CX-Drive
CX-Drive is a PC software tool for parameter management, monitoring, and diagnosis. CX-Drive can load, store, and copy
drive parameter settings. For details, refer to Help in the CX-Drive software.
66
Refer to Verifying Parameter Changes: Verify Menu on
Description
SIEP C710606 33A OYMC AC Drive – J1000 User Manual
Setting
Default
Range
0,2 2
key and the